HUNT SPRINT AERO WIDE WHEELSET - Tubeless Ready / Classic Look

RACE-READY PERFORMANCE ALLOY WHEELSET, WITH OUR FAST-ENGAGEMENT SPRINT HUBS FOR MAXIMUM POWER TRANSFER 

31 DEEP | 24 WIDE | 1,497G

"Polished, smooth and speedy. The performance of HUNT’s new race wheels is as polished as they look"  BIKE RADAR 4.5/5 REVIEW

"The shiny silver Sprint Aero Wide were actually developed with Hunt’s pro conti team for training, but the bling is totally race ready."  BIKE RUMOR 

THE PURPOSE

알루미늄 색상이 그대로 빛나는 클래식한 모습에 24mm 림폭으로 경쟁에서도 탁월한 성능을 보여주는 alloy rim-brake wheelset이다. 어느 때보다도 코너를 더 빨리 타이트하게 돌게 될 것입니다. 24mm의 넓은 림폭이 타이어의 형상을 보다 확대시켜주어 놀라운 그립력 향상을 제공하기 때문입니다. 24mm의 넓은 림폭에 25C 또는 28C tire를 장착하게 되면 거칠은 노면도 부드럽게 달리며 안정적으로 속도를 낼 수 있습니다.  이 휠셋은 UCI Continental level racing에서 the Canyon dhb p/b Bloor Homes UCI Continental pro team이 사용 중이다.

FEATURES

RIMS I Highly Polished Alloy finish 처리가 된 클래식한 림이면서 24mm 광폭을 적용하여 그립력, 공기역학 성능, 구름저항의 향상을 위해서 한계치까지 밀어붙여 훨씬 넓은 림폭과 깊이를 확보하였다. 24mm wide와 31mm deep을 가진 둥근 형태의 림(rounded profile rim)의 1,500그램 미만의 휠셋를 만들기 위한 고급 alloy소재인 HFR+ alloy를 사용하였다. HFR+ alloy는 특별한 열가공 처리 과정을 거친 소재로서 일반적인 알로이 휠의 6061-T6 소재보다 무게, 강성, 내구성을 더 향상하여 더 넓고 깊은 형상으로 향상된 공기역학을 가지면서 여전히 가벼운 무게를 유지할 수 있게 되어 탁월한 클라이밍과 가속성을 가능하게 해줍니다. 

RIM BED I Hunt의 독자적인 tubeless-ready rim bed profile인 H-Lock은 tubeless 장착 홈 부위가 위로 향하도록 디자인되어 첫 장착부터 손쉽고 탁월한 밀착력을 보여주며 H-Lock profile은 일단 tubeless 타이어가 장착되면 더 확실하게 타이어 비드가 장착되도록 해준다. 이러한 특성은 낮은 공기압에서나 오프로드 라이딩에서 매우 중요하다. 

HUBS I Race Season SPRINT straight-pull 허브로 15mm의 7075-T6 axle이 적용되었다. 추가적인 강성확보를 위한 원형의 dropout interface steps 적용. 3개의 treble-tooth pawl과 7.5도의 체결각도 적용으로 즉각적인 체결 가능. Steel spline 삽입으로 카세트 바디 보호 기능 적용.

BEARINGS I 휠의 심장인 베어링은 충분한 투자를 할 가치가 있는 부품이다. Hunt는 고품질의 정밀한 부드러운 구름성을 지닌 밀폐형 카트리지 베어링 (sealed cartridge bearings)을 이 휠에 적용한다. 일본 베이링 전문 업체인 EZO의 베어링으로 이 휠은 3개의 rear hub bearings을 가지고 있으며 베어링 내부면을 낮은 마찰력을 가진 S&S low-friction LU/LB seals로 업그레이드하여 추가적으로 구름저항성을 감소시키면서 베어링 외부면 또한 탁월하게 밀봉되도록 하였다. 

SPOKES I 최고급 라인인 Pillar Spoke Re-enforcement PSR XTRA models을 적용하였으며 이 butted blade aero spokes는 더 가볍고 더 높은 탄성을 지녀 더 오래 스포크 텐션을 유지하며 피로도에 보다 강하다. PSR spokes는 스트레스가 높은 영역인 헤드 부분은 보강하여 2.2mm 폭을 지니며 nipples은 14mm alloy로 정밀 텐션 조정을 위해 6각 헤드 (hex head)를 가진다. Hunt의 모든 휠은 허브, 림, 스포크를 수작업으로 빌딩함으로써 완벽한 성능을 발휘할 수 있도록 해준다. 

NIPPLES I 경량의 alloy nipples이 적용되어 높은 성능의 휠셋의 무게를 감소시키며 더 진 14mm nipples이기에 탁월한 강성과 더 긴 나사선 (thread connection)을 제공한다. 이 alloy nipples은 4각의 몸통부분과 6각의 헤드을 지녀 보다 쉬운 텐션 조정과 유지 보수가 가능하다. (hex spoke key가 기본으로 함께 제공된다.) 

SPECS OVERVIEW

• Rims | HFR Alloy+ rims은 특별한 열가공 과정을 거쳐 (heat treatment process) 일반적인 6061-T6 rims보다 훨씬 높은 피로도 저항성을 가진다. 31mm deep, 19mm internal, 24mm external width로 25C이나 28C 광폭 로드 타이어 또는 45C까지의 CX 타이어를 장착할 경우 보다 탁월한 타이어 장착 형상 (tire profile)을 만들어 주어 향상된 그립력과 낮은 구름저항을 제공한다.
• Tires | 19mm rim bed로 더 넓은 타이어 장착 형상 (tire profile)을 가진다. 700x23C tires도 좋지만 25C 또는 28C 그리고 더 광폭의 cross tires가 더욱 이상적이다. Tubeless-ready 휠셋이기에 clincher tires와 tubes도 장착이 가능하다.
• Hubs | HUNT Race Straight-Pull with 7.5° RapidEngage 3-pawl freehub, 
• QR | Hunt Race Season super-light with heat-treated alloy/brass cam plate actuation and stainless steel springs.
• Max Tire Pressure I Clincher tires경우 Max 120psi / Tubeless tires경우 Max 100 psi / 30mm경우 70psi, 33mm경우 50psi, 35-45mm경우 40psi, 46mm이상 경우 35psi. 
• Max Rider Weight I 100KG (Including luggages)
• Weight | 1,497g

IN THE BOX

• Front wheel and Rear Wheels with Hunt Black Shield tubeless tape fitted
• Pair quick-releases
• Cassette spacer for 8/9/10 speed
• Tubeless Valves
• Spare of each spoke plus nipples
• Quality control card signed by your wheel builder

보증 기간: 3 YEARS

원산지: DESIGNED IN THE UK AND MADE IN TAIWAN

HUNT SPRINT AERO WIDE WHEELSET - Tubeless Ready / Classic Look

RACE-READY PERFORMANCE ALLOY WHEELSET, WITH OUR FAST-ENGAGEMENT SPRINT HUBS FOR MAXIMUM POWER TRANSFER 

31 DEEP | 24 WIDE | 1,497G

"Polished, smooth and speedy. The performance of HUNT’s new race wheels is as polished as they look"  BIKE RADAR 4.5/5 REVIEW

"The shiny silver Sprint Aero Wide were actually developed with Hunt’s pro conti team for training, but the bling is totally race ready."  BIKE RUMOR 

THE PURPOSE

Find the extra gear at the very last, sprint away from the competition, and look resplendent in the process! You will take the corners faster and tighter than ever before due to the 24mm rim width opening out your tire profile and providing incredible grip. This is our fastest alloy rim-brake wheelset, and is as used in UCI Continental level racing by the Canyon dhb p/b Bloor Homes UCI Continental pro team. The wide rim, working with a 25 or 28c tire, will eat up rough roads allowing you to hold your line and carry your speed.The freehub body on the HUNT Sprint hub features 48 teeth on the ratchet ring, and treble-tooth pawls, providing incredible 7.5° engagement. Perfect for when the hammer goes down and you need an instant response. The strong individual leaf-sprung pawls are louder than circular spring set-ups, but we think that is the right decision to make for this type of wheelset. Also, stiffness = speed... so we specced large 15mm diameter hub axles for sprinting and out-of-saddle climbing. Ease into them, your mates won’t know it’s the wheels!. Float up the climbs too, thanks to a sub 1500g bench-mark weight.

FEATURES

RIMS I We've pushed the boundaries and added even more width and depth for extra grip, low aero drag and low rolling resistance. 24mm wide and 31mm deep rounded profile rim made from an enriched alloy that builds into a sub 1500g wheelset. HFR+ alloy is a material that uses a heat-treatment process which delivers outstanding weight, stiffness and durability meaning rims can be wider and deeper for better aero performance and yet remain super-light for excellent climbing and acceleration.

BEARINGS I The heart of any wheel. Investing in them makes huge sense. We use high-grade precision smooth-rolling sealed cartridge bearings by Japanese experts EZO. This wheelset has three of the rear hub bearings upgraded to S&S low-friction LU/LB seals on the internal bearing face to further reduce rolling resistance whilst maintaining excellent sealing on the exposed faces.

SPOKES I We chose the top-of-the-range Pillar Spoke Re-enforcement PSR XTRA models. These butted blade aero spokes are lighter and provide a greater degree of elasticity to maintain tensions longer and add fatigue resistance. PSR spokes feature the 2.2 width at the head providing more material in this high stress area. Nipples are 14mm alloy, anodized and come with a hex head so you can achieve precise tensioning. Combining components well is key which is why all Hunt wheels are hand-built.

NIPPLES I Lightweight alloy nipples are the right decision to make for a high-performance wheelset where weight matters, plus we use longer 14mm nipples to provide great strength and a long thread connection with the spokes. The nipples also feature square bodies with a hex head (hex spoke key provided with the wheels) to allow ease of tensioning and maintenance.

SPECS OVERVIEW

THE SUPER-WIDE, SERIOUSLY-LIGHT, AERO-BEATING 31MM DEEP ROAD WHEELSET

• Rims | Our HFR Alloy+ rims are constructed using a heat treatment process, delivering far higher fatigue resistance than 6061-T6. High-polished aluminum finish. 31mm deep. 19mm internal and 24mm external width, creating an excellent tire profile for wide road tires and cross tires up to 45c.
• Tires | Designed with a wide 19mm rim bed to create a wider tire profile. Great with 700x23mm tires but ideal for 25, 28 and cross tires. Also works excellently with clincher tires and tubes.
• Hubs | HUNT Race Straight-Pull with 7.5° RapidEngage 3-pawl freehub, 
• QR | Hunt Race Season super-light with heat-treated alloy/brass cam plate actuation and stainless steel springs.
• Max Tire Pressure I Suitable for tires from 23mm up to 50mm wide / 120psi when used with an inner tube and 100psi when running the wheel set-up tubeless. 100 psi is more than enough for any rider on road. 30mm do not exceed 70psi, 33mm do not exceed 50psi, 35-45mm do not exceed 40psi, 46mm+ do not exceed 35psi. Please do not exceed the maximum pressure stated on your tire.
• Max Rider Weight I 100KG (Including luggages)
• Weight | 1,496g

IN THE BOX

• Front wheel and Rear Wheels with Hunt Black Shield tubeless tape fitted
• Pair quick-releases
• Cassette spacer for 8/9/10 speed
• Tubeless Valves
• Spare of each spoke plus nipples
• Quality control card signed by your wheel builder

WARRANTY: 3 YEARS

DESIGNED IN THE UK AND MADE IN TAIWAN